Thermal Insulation Board Adhesive

Product Definition

• Cement-based, polymer-modified adhesive mortar for thermal insulation boards.

• Easy application
• High bonding strength
• Resistant to thermal shocks
• Does not contain asbestos, non-flammable.

• Used for bonding thermal insulation boards such as EPS and XPS in both interior and exterior areas of all buildings.
• Please consult us for all other applications.

• Not suitable for application on unstable or low-resistance surfaces.

• TS EN 13566

• CE

These values were obtained in a laboratory environment and may vary under construction site conditions.

• No foreign materials should be added under any circumstances.
• All tools used should be washed with water before they dry.
• Mortar that has passed its use-by date should not be reused.
• The panels should be placed close together, minimizing gaps.

• The surface should be clean, dry, smooth, and sound.
• Highly porous or highly absorbent surfaces should be moistened and allowed to remain damp.

• Ambient temperature between +5 °C and +35 °C.
• Do not apply in very humid, very hot, or excessively windy conditions.
• Do not apply on frozen, thawing, or surfaces at risk of freezing within 24 hours.

• Slowly pour 25 kg of powder into 6.5-6.8 liters of water and mix thoroughly with a low-speed mixer.
• Let it rest for 5-10 minutes, then mix again.
• Apply around the edges of the panel, leaving a 5 mm gap.
• Apply 3 large dots of adhesive to the center.
• At least 40% of the panel should be covered with adhesive; it should not spill over into the joints.
• Plaster application can be done after 2 days.

5 kg of powder per 1 m² of application

25 kg bag (60 bags per pallet, 1500 kg)

80 x 110 cm

White, gray

Hand mixer, trowel

• 1 year from the production date in a dry environment
• When not in use, the packaging should be tightly sealed