Satin Finishing Plaster

SATIN PLASTER FINE APPLICABLE PLASTER, C6 1. Product Description Fine Applicable Plaster is a surface leveling compound that can be used as a base coat for all painted surfaces. 2. Content Information Calcium Sulfate Hemihydrate + Calcium Carbonate + Citric Acid + Cellulosic Ether 3. Physical and Chemical Properties Form: Powder Odor: Odorless Color: White, yellowish Solubility in Water: Soluble in water 4. Relevant Standards/Declarations TS EN 13279-1: Building Plasters and Plastering Compounds - Lightweight plaster for buildings (hand-applied plaster) C6 / 20 / 2 CE Declaration 5. Application Areas Applied to plaster surfaces and plasterboard surfaces. 6. Packaging Polypropylene laminated bag, 30 kg ± 2% 7. Storage Conditions Must be stored in its original packaging, closed, in a dry place and on pallets. 8. Advantages The long processing time allows for easy and waste-free application. Thanks to its special particle distribution, it makes the application surface smooth. It creates a suitable surface for paint and wallpaper applications. 9. Application Surface Properties The application ambient temperature must be at least +5°C. Substances that prevent adhesion on the application surface (dust, oil, etc.) must be cleaned. 10. Preparing the Mortar Water is added to a clean container in accordance with the amount of mortar required (water/plaster ratio: 6.5 liters of water to 10 kg of ALL Satin Plaster). ALL Fine Applicable Plaster is sprinkled onto the water. The mortar is left to stand for 2 minutes to allow the plaster and water to fully mix and settle. To obtain a homogeneous mixture, the mortar must be mixed with a mechanical mixer. The mortar obtained after mixing is ready for use. The mortar must be used within 80 minutes.