Satin Finishing Plaster
SATIN PLASTER FINE APPLICABLE PLASTER, C6 1. Product Description
Fine Applicable Plaster is a surface leveling compound that can be used as a base coat for all painted surfaces.
2. Content InformationCalcium Sulfate Hemihydrate + Calcium Carbonate + Citric Acid + Cellulosic Ether
3. Physical and Chemical Properties- Form: Powder
- Odor: Odorless
- Color: White, yellowish
- Solubility in Water: Soluble in water
TS EN 13279-1: Building Plasters and Plastering Compounds - Lightweight plaster for buildings (hand-applied plaster)
C6 / 20 / 2
CE Declaration
5. Application AreasPlaster
Raw concrete
Applied to plasterboard surfaces.
6. PackagingPolypropylene laminated bag, 30 kg ± 2%
7. Storage ConditionsMust be stored in its original packaging, closed, in a dry place and on pallets.
8. AdvantagesThe long processing time allows for easy and waste-free application. Thanks to its special particle distribution, it makes the application surface smooth. It creates a suitable surface for paint and wallpaper applications.
9. Application Surface PropertiesThe application ambient temperature must be at least + 5 ºC.
Substances that prevent adhesion on the application surface (dust, oil, etc.) must be cleaned.
10. Preparing the MortarWater is added to a clean container in accordance with the amount of mortar required (water/plaster ratio: 6.5 liters of water to 10 kg of ALL Satin Plaster). ALL Fine Applicable Plaster is sprinkled onto the water. The mortar is left to stand for 2 minutes to allow the plaster and water to fully mix and settle. To obtain a homogeneous mixture, the mortar must be mixed with a mechanical mixer. The mortar obtained after mixing is ready for use. The mortar must be used within 80 minutes.
11. ApplicationALL Fine Applicable Plaster mortar is placed onto a steel trowel and applied to the application surface with a plastering trowel. After the initial set, marks on the surface caused by the trowel are smoothed out. Technical specifications may vary according to site conditions and ground properties.
12. Shelf Life12 months from the date of manufacture.
13. Technical SpecificationsTechnical specifications may vary according to site conditions and ground properties.
Technical Specifications
| 1. Physical Appearance | White powder |
| 2. Content | Calcium sulfate Hemihydrate + Calcium carbonate + Cellulosic ether + Citric acid |
| 3. Water/Plaster Ratio | 7 liters of water per 10 kg of plaster |
| 4. Setting Start Time (td) | min. 60 min. |
| 5. Freezing Time | 150-300 min. |
| 6. Bulk Density | - |
| 6.1 Density (K.L.A) | 650-700 g/L |
| 7. Spread Diameter | 150-165 mm |
| 8. PH | 6-7 for a 1 liter measured container |
| 9. Tensile Strength in Bending | TSE YILDIZ SATIN: ≥1.4 N/mm², TSE SATIN: ≥1.0 N/mm² |
| 10. Compressive Strength | TSE YILDIZ SATIN: ≥3.1 N/mm², TSE SATIN: ≥2.0 N/mm² |
| 11. Reaction to Fire | A1 |
| 12. Consumption Amount | 1 kg/m² at 1 mm thickness |
| 13. Application Thickness | 1 mm |
| 14. Sieve Analysis | max .160 μ=0 |
| 15. Packaging | 15.1 Type: Polypropylene Bag 15.2 Net Weight: 30 kg ±2 |
