Marble Adhesive

Product Definition

• Cement-based, slip-resistant, single-component granite and marble adhesive mortar containing performance-enhancing additives.

• Easy to apply
• Does not sag in vertical applications
• Reinforced formula

• Used for bonding ceramics with a water absorption rate below 5%, as well as materials such as granite ceramics and marble.
• Please consult us for all other applications.

Reference Standards

• TS EN 12004-1 / C2T class

Quality Certificates

• CE

These values were obtained in a laboratory environment and may vary under site conditions.

Warnings and Recommendations

• No foreign materials should be added under any circumstances.
• All tools used should be washed with water before they dry.
• Mortar that has passed its use-by date should not be reused by adding water.

Surface Preparation

• The surface should be clean, dry, smooth, and solid. Plasters thinner than 3 mm should be cleaned by scraping.
• They should be free of roughness that would reduce adhesion.
• Significant defects or holes should be repaired with Alser Repair Mortar at least 24 hours before tile application.
• Porous surfaces should be moistened, and the surface should be left until the water layer disappears, keeping the surface moist.
• Repairs under 7 mm can be made with Alser Granite and Marble Adhesive.
• On raw concrete surfaces, a single coat of ALLASTAR raw concrete primer should be applied.

Application Conditions

• Ambient temperature between +5 °C and +35 °C.
• Should not be applied on frozen, thawing, or surfaces at risk of freezing within 24 hours.
• Should not be applied in direct sunlight, strong wind, or on hot surfaces.
• The mortar should not form a film on the surface; if it does, it should be raked again.

Application Instructions

• Slowly pour 25 kg of powder into 6.5-7 liters of water. Mix with a low-speed mixer until there are no lumps.
• Let it rest for 5-10 minutes, then mix again.
• Apply the mortar to the surface, adjusting the thickness with a notched steel trowel.
• Select the trowel notch size according to the ceramic tile size.
• Double-sided bonding is required for floors over 1100 cm², walls over 900 cm², and all outdoor applications.
• Air should be removed by applying force with a rubber mallet.
• Tiles should be laid within 20 minutes.
• The prepared mixture should be used within 3 hours.
• Grout should be applied after 2 days on floors and 24 hours on walls.

Packaging

25 kg bag (60 bags per pallet, 1500 kg)

Pallet Dimensions

80 x 110 cm

Color

White, gray

Application Tools

Hand mixer, trowel, rubber mallet, notched steel trowel

Shelf Life

• 1 year from the date of manufacture in a dry environment
• When not in use, the packaging should be tightly closed