Machine Plaster
DEFINITION
Cement-based, polymer-modified, slip-resistant, extended working time, standard performance tile and ceramic adhesive.
AREAS OF USEUsed for bonding covering materials such as ceramic and tiles to walls and floors in interior spaces, in wet areas such as kitchens and bathrooms, and on surfaces such as concrete, screed, and plaster.
FEATURES / ADVANTAGES- Easy to apply,
- Provides high adhesion,
- Adapts to the applied surface,
- Provides extended working time,
- High slip resistance, can be used in vertical applications.
- Form: Cement-based, polymer-modified powder
- Color: Gray, White
- Packaging: 25 kg kraft bag
- Shelf Life: 12 months in a dry environment
- Unit Weight: 1300 ±100 g/l
- Mortar Pot Life: 3.5 hours
- Working Time: 30 min
- Joint Application: After 24 hours
- Application Thickness: Min. 3mm, Max. 8 mm
The surface to be applied must be free of dust, lime, mold oil, paint residue, and other substances that reduce adhesion. If present, any imperfections on the surface should be repaired with Allkim Flex Repair Mortar 48 hours in advance.
APPLICATIONPour 6-7 liters of water into a clean container large enough to hold one bag. Slowly add Allkim Flex Extra Tile and Ceramic Adhesive to the water and mix with a low-speed mixer until a homogeneous mixture is obtained. Allow the mixed material to rest for about 5 minutes before use.
The prepared mortar is applied with a notched trowel. Depending on ambient temperatures, grouting can be performed after an average of 24 hours.
ALLKİM FLEX TILE AND CERAMIC ADHESIVE ÜTF DEFINITIONCement-based, standard performance tile and ceramic adhesive.
AREAS OF USEIt is used for bonding covering materials such as ceramic and tiles to walls and floors in interior spaces, in wet areas such as kitchens and bathrooms, and on surfaces such as concrete, screed, and plaster.
FEATURES / ADVANTAGES- Provides easy application,
Technical Specifications
| 1. Physical Appearance | White Powder | |
| 2. Sieve Analysis | ||
| 2.1. Over 45 Microns | % 0.05 – 0.1 | |
| 2.2. Over 160 Microns | % 11 – 13 | |
| 3. Water / Plaster Ratio | 70% | |
| 4. Freezing Time | 50 – 90 min. | |
| 5. Spread Diameter | 150 – 160 mm | |
| 6. PH | 7 – 8 | |
| 7. Surface Hardness | 40 shore D | |
| 8. Compressive Strength | > 2.0 | |
| 9. Tensile Strength in Bending | > 1.0 | |
| 10. Fire Resistance | A1 | |
| 11. Packaging | ||
| 11.1. Type | Polypropylene Bag 30 kg + 2% |
|
| 11.2. Net Weight | ||
