Joint Filler
PRODUCT DEFINITION
Cement-based, high-performance, water-repellent, single-component joint filler containing polymer additives.
APPLICATION AREA- Used for filling 0-6 mm joints in indoor and outdoor areas, on walls and floors, and on floors with heavy foot and load traffic.
- Please consult us for all other applications.
- Not suitable for use in areas exposed to high pressure (>100 bar) and chemicals, or in areas requiring hygiene.
- Not suitable for swimming pools.
- Not suitable for floors prone to deformation, such as underfloor heating systems.
- TS EN 13888 CG1
- CE
These values were obtained from tests conducted under laboratory conditions at 23±2 °C and 50% relative humidity, and reflect performance after 28 days. Values may vary due to differences in the construction site environment.
WARNINGS AND RECOMMENDATIONS- No foreign materials should be added under any circumstances.
- All tools used should be washed with water before they dry.
- Mortar that has passed its use-by date should not be reused by adding water.
- For high performance, the application area should be moistened with water the next day.
- To avoid yellowing in white and light-colored grout, ceramic tiles should not be soaked in water.
- The surface must be clean, smooth, and solid.
- The ambient temperature should be between +5 °C and +30 °C.
- Grout joints must be cleaned and walls moistened before application.
- The ambient temperature should be between +5 °C and +35 °C.
- Application should not be carried out in very humid, very hot, or excessively windy weather.
- It should not be applied on frozen, thawing, or surfaces at risk of freezing within 24 hours.
- Slowly pour 20 kg of Allkim Flex Joint Filler into 7.5-8 liters of water and mix with a low-speed mixer until homogeneous.
- Allow the prepared mortar to rest for 5-10 minutes, then mix again before application.
- The mortar should be filled into the joints with a rubber trowel and any excess should be scraped off.
- After 15-30 minutes, the surface should be cleaned with a damp sponge.
Varies depending on the application.
PACKAGING20 kg bag (60 pieces per pallet, 1200 kg)
PALLET DIMENSIONS80 x 110 cm
COLORWhite, gray, beige, and other colors
APPLICATION TOOLSHand mixer, trowel, rubber-tipped trowel, sponge-tipped trowel, squeegee, sponge, brush
SHELF LIFE- 1 year from the date of manufacture in a dry, moisture-free environment
- When not in use, the packaging should be tightly closed
Technical Specifications
PERFORMANCE INFORMATION
| Usable Time | Max 1 hour |
| Full Hardening Time | 24 hours |
| Time to Open to Traffic | 24-48 hours |
| Flexural Strength | ≥ 2.5 N/mm² (TS EN 12808-3) |
| Flexural Strength After Freeze-Thaw Cycle | ≥ 2.5 N/mm² (TS EN 12808-3) |
| Compressive Strength | ≥ 15 N/mm² (TS EN 12808-3) |
| Compressive Strength After Freeze-Thaw Cycle | ≥ 15 N/mm² (TS EN 12808-3) |
| Abrasion Resistance | ≤ 2000 mm³ (TS EN 12808-2) |
| Shrinkage | ≤ 3 mm/m (TS EN 12808-4) |
| Water Absorption 30 min. / 4 hours | ≤ 5 g / ≤ 10 g (TS EN 12808-5) |
| Fire Reaction Class | A1 (TS EN 13501-1) |
