Bims Adhesive Mortar
DESCRIPTION
It is a cement-based, ready-to-use masonry mortar used for laying materials such as bricks, blocks, and pumice.
AREAS OF USEUsed for building walls with bricks, blocks, pumice, and stone.
FEATURES / ADVANTAGES- Ready to use.
- Provides ease of application with sufficient working time.
- Offers advantages in both horizontal and vertical applications.
- Saves time and labor compared to traditional mortar and prevents material waste.
SURFACE PREPARATIONThe surface to be applied must be cleaned of dust, lime, form oil, paint residues, and other substances that may reduce adhesion.
Highly absorbent surfaces should be moistened before application.
If there are any irregularities on the surface, they should be leveled using mortar.
APPLICATIONPour 4–5 liters of water into a clean container of sufficient size for one bag. Gradually add Allkim Pumice Adhesive into the water and mix with a low-speed mixer until a homogeneous mixture is obtained. Let the mixture rest for 5 minutes, then mix again for 1–2 minutes before use. Apply the prepared mortar onto the surface using a suitable notched steel trowel. Ensure the pumice block placed on the surface is fully adhered by tapping it with a rubber mallet. Continue the application in the same manner.
APPLICATION TOOLSHand mixer, notched steel trowel, rubber mallet
SHELF LIFE1 year from the date of production when stored in dry and moisture-free conditions.
CONSUMPTIONApproximately 17 – 21 kg / m² depending on the application surface
WARNINGS AND PRECAUTIONS- Application temperature should be between +5°C and +35°C.
- Do not apply under heavy rain or direct sunlight without taking precautions.
- No foreign materials should be added to Allkim Pumice Adhesive mortar.
- Avoid continuous contact with eyes and skin, and do not inhale dust.
- Personal protective equipment (gloves, dust mask, etc.) must be used during application.
- The specified values are valid under conditions of 23 ± 2°C temperature and 50 ± 5% relative humidity.
25 kg kraft bags (64 units per pallet – 1600 kg)
Technical Specifications
PRODUCT INFORMATION
| Bulk Density of Hardened Mortar (kg/m³) | 1800 ± 200 |
| Dry Density (g/cm³) | 1500 ± 200 |
| Workability Time (min) | ≥ 100 |
| Correction Time (min) | Min 4 min |
| Compressive Strength (N/mm²) | ≥ 5 (M5) |
| Maximum Aggregate Size (mm) | ≤ 2 |
| Water Absorption (kg/m².min0.5) | ≤ 2.5 |
| Water Vapor Permeability Coefficient (µ) | 15/35 |
| Reaction to Fire | A1 |
