Moulding Plaster

MOULDING PLASTER CONSTRUCTION PLASTER FOR FIBER-REINFORCED PLASTER ELEMENTS, C1 1. Product Description Construction plaster for fiber-reinforced plaster elements is a decorative construction plaster consisting of fine plaster. 2. Content Information Sulfate Hemihydrate + Calcium Carbonate + Citric Acid 3. Physical and Chemical Properties Form: Powder Odor: Odorless Color: White, yellowish Solubility in Water: Soluble in water 4. Relevant Standards/Declarations TS EN 13279-1: Building and Plastering Plasters - Lightweight plaster for buildings (Hand-applied plaster) C1/ 8 CE Declaration 5. Application Areas Decorative ceilings Cornices 6. Packaging Polypropylene laminated bag, 30 kg ± 2% 7. Storage Conditions Must be stored in its original packaging, in a dry place and on pallets. 8. Advantages Fine particle structure. Therefore, it creates a smooth surface during casting. Setting time allows for comfortable and seamless application. 9. Application Surface Properties Moulding plaster moulds must be completely dry before installation. The application ambient temperature must be at least +5 ºC. 10. Preparing the Mortar Add water appropriate for the amount of mortar to a clean container (water/plaster ratio: 7 liters of water to 10 kg of ALL Moulding Plaster). Sprinkle ALL Fiber-Reinforced Plaster for Structural Plaster Elements onto the water. Wait 2 minutes for the plaster to fully contact and sink into the water. A mechanical mixer should be used to obtain a homogeneous mixture. After mixing, the plaster is ready for casting. The plaster sets in approximately 25 minutes. 11. Application The plaster is poured into molds and left to dry. Technical specifications may vary depending on site conditions and ground characteristics. 12. Shelf Life It is 6 months from the date of production. 13. Technical Specifications Technical specifications may vary depending on site conditions and ground characteristics.