Joint Filler

PRODUCT DEFINITION

Cement-based, high-performance, water-repellent, single-component joint filler containing polymer additives.

• Used for filling 0-6 mm joints in indoor and outdoor areas, on walls and floors, and on floors with heavy foot and load traffic.
• Please consult us for all other applications.

• Not suitable for use in areas exposed to high pressure (>100 bar) and chemicals, or in areas requiring hygiene.
• Not suitable for swimming pools.
• Not suitable for floors prone to deformation, such as underfloor heating systems.

• TS EN 13888 CG1

• CE

These values were obtained from tests conducted under laboratory conditions at 23±2 °C and 50% relative humidity, and reflect performance after 28 days. Values may vary due to differences in the construction site environment.

• No foreign materials should be added under any circumstances.
• All tools used should be washed with water before they dry.
• Mortar that has passed its use-by date should not be reused by adding water.
• For high performance, the application area should be moistened with water the next day.
• To avoid yellowing in white and light-colored grout, ceramic tiles should not be soaked in water.

• The surface must be clean, smooth, and solid.
• The ambient temperature should be between +5 °C and +30 °C.
• Grout joints must be cleaned and walls moistened before application.

• The ambient temperature should be between +5 °C and +35 °C.
• Application should not be carried out in very humid, very hot, or excessively windy weather.
• It should not be applied on frozen, thawing, or surfaces at risk of freezing within 24 hours.

• Slowly pour 20 kg of Allkim Flex Joint Filler into 7.5-8 liters of water and mix with a low-speed mixer until homogeneous.
• Allow the prepared mortar to rest for 5-10 minutes, then mix again before application.
• The mortar should be filled into the joints with a rubber trowel and any excess should be scraped off.
• After 15-30 minutes, the surface should be cleaned with a damp sponge.

Varies depending on the application.

20 kg bag (60 pieces per pallet, 1200 kg)

80 x 110 cm

White, gray, beige, and other colors

Hand mixer, trowel, rubber-tipped trowel, sponge-tipped trowel, squeegee, sponge, brush

• 1 year from the date of manufacture in a dry, moisture-free environment
• When not in use, the packaging should be tightly closed