Decorative Plaster

Cement-based, thick-textured, decorative exterior cladding material.

Used as a final coating material in exterior cladding applications on rough plaster, fine plaster, exposed concrete, aerated concrete surfaces, and exterior thermal insulation systems.

• Provides high adhesion.
• Resistant to freeze-thaw cycles.
• Allows the system to breathe due to its vapor permeability.
• Provides easy and long-term working time.
• Provides a smooth and aesthetic appearance on exterior surfaces.
• Has water-repellent properties.
• Compensates for surface imperfections.
• Minimizes the risk of cracking with its flexible structure.

Form: Cement-based, polymer-modified powder

Color: White

Packaging: 25 kg kraft bag

Shelf Life: 12 months in a dry environment without moisture

Unit Weight: 1300 ± 100 g/lt

Pot Life: 2 - 3 hours

Working Time: 30 minutes

Application Thickness: 2 - 3 mm

• The surface must be clean, smooth, and solid.
• The surface should be moistened before application.
• Avoid application in very high or low temperatures.
• A primer should be used to ensure better adhesion of the decorative plaster to the substrate.

Pour 5 - 6 liters of water into a clean container large enough to hold one bag. Allkim Flex Decorative Plaster (Thick) is slowly added to the water and mixed with a low-speed mixer until a homogeneous mixture is obtained. The mixed mortar is left to rest for 5 minutes, then mixed again for 1-2 minutes until ready for use. The prepared mortar should be applied to the surface in an even thickness using a suitable steel trowel, and then smoothed with a float as desired after application.

Hand mixer, steel trowel, spatula, rubber trowel

1 year from the date of manufacture in a dry environment free from moisture.

Depending on the surface to be applied and the thickness, 2.8 – 3.5 kg/m² for a thickness of 2–3 mm.

• The application environment temperature should be between +5 ⁰C and +35 ⁰C.
• Avoid application in very humid and very hot weather.
• Do not apply on surfaces where there is a risk of frost.
• Avoid prolonged contact with eyes and skin, and do not inhale dust.
• Clean all tools with water before they dry.
• The information provided is valid for application areas with a temperature of 23 ± 2 ⁰C and humidity of 50 ± 5%.

25 kg kraft bags (64 bags per pallet, 1600 kg)