Tile and Ceramic Adhesive

ALLKİM FLEX EXTRA TILE AND CERAMIC ADHESIVE ÜTF DEFINITION Cement-based, polymer-modified, slip-resistant, extended working time, standard performance tile and ceramic adhesive. APPLICATION AREAS

Used for bonding covering materials such as ceramic and tile to walls and floors in interior spaces, in wet areas such as kitchens and bathrooms, and on surfaces such as concrete, screed, and plaster.

• Easy to apply,
• Provides high adhesion,
• Adapts to the applied surface,
• Provides extended working time,
• High slip resistance, can be used in vertical applications.

• Form: Cement-based, polymer-modified powder
• Color: Gray, White
• Packaging: 25 kg kraft bag
• Shelf Life: 12 months in a dry environment
• Unit Weight: 1300 ±100 g/l
• Pot Life of Mortar: 3.5 hours
• Working Time: 30 min
• Joint Application: After 24 hours
• Application Thickness: Min. 3 mm, Max. 8 mm

The surface to be applied must be free of dust, lime, mold oil, paint residue, and other substances that reduce adhesion. If present, any imperfections on the surface should be repaired with Allkim Flex Repair Mortar 48 hours in advance.

Pour 6-7 liters of water into a clean container large enough to hold one bag. Slowly add Allkim Flex Extra Tile and Ceramic Adhesive to the water and mix with a low-speed mixer until a homogeneous mixture is obtained. Allow the mixed material to rest for about 5 minutes before use.

The prepared mortar is applied with a notched trowel. Depending on ambient temperatures, grouting can be performed after an average of 24 hours.

Cement-based, standard performance tile and ceramic adhesive.

It is used for bonding covering materials such as ceramic and tiles to walls and floors in interior spaces, in wet areas such as kitchens and bathrooms, and on surfaces such as concrete, screed, and plaster.

• Easy to apply,
• Provides high adhesion,
• Adapts to the applied surface,

• Form: Cement-based powder
• Color: Gray, White
• Packaging: 25 kg kraft bag
• Shelf Life: 12 months in a dry environment
• Unit Weight: 1300 ± 100 g/lt
• Pot Life of Mortar: 3 hours
• Working Time: Max. 25 minutes
• Joint Application: After 24 hours
• Application Thickness: Min. 3mm, Max. 8 mm

The surface to be applied must be free of adhesion-reducing substances such as dust, lime, mold oil, and paint residue. If present, any imperfections on the surface should be repaired with Allkim Flex Repair Mortar 48 hours in advance.

Pour 6-7 liters of water into a clean container large enough to hold one bag. Slowly add Allkim Flex Tile and Ceramic Adhesive to the water and mix with a low-speed mixer until a homogeneous mixture is obtained. Allow the mixed material to rest for 5 minutes before use.

The prepared mortar is applied with a notched trowel. Depending on ambient temperatures, grouting can be performed after an average of 24 hours.

Hand mixer, notched trowel, rubber mallet

1 year from the date of manufacture in dry, moisture-free conditions.

• Application environment temperature: +5 ⁰C to +35 ⁰C
• The floor should be opened to traffic at least 24 hours after application.
• Do not apply without precautions in heavy rain or direct sunlight.
• Do not add foreign substances to Allkim Flex Tile and Ceramic Adhesive.
• Avoid prolonged contact with eyes and skin, and do not inhale dust.
• Personal protective equipment (gloves, dust mask, etc.) must be worn during application.

The information provided is valid for application areas with a temperature of 23 ± 2°C and humidity of 50 ± 5%.

• Standard Type: C1T TS EN 12004
• Initial Tensile Adhesion Strength: ≥ 0.5 N/mm² TS EN 1348
• Tensile Adhesion Strength after Immersion in Water: ≥ 0.5 N/mm² TS EN 1348
• Tensile adhesion strength after heat aging: ≥ 0.5 N/mm² TS EN 1348
• Tensile adhesion strength after freeze-thaw cycle: ≥ 0.5 N/mm² TS EN 1348

25 kg kraft bags (64 bags per pallet, 1600 kg)