Extra Tile and Ceramic Adhesive

ALLKİM FLEX EXTRA TILE AND CERAMIC ADHESIVE ÜTF DEFINITION Cement-based, polymer-modified, slip-resistant, extended working time, standard performance tile and ceramic adhesive. APPLICATION AREAS

Used for bonding covering materials such as ceramic and tile to walls and floors in interior spaces, in wet areas such as kitchens and bathrooms, and on surfaces such as concrete, screed, and plaster.

• Provides easy application,
• Ensures high adhesion,
• Adapts to the applied surface,
• Provides extended working time,
• High slip resistance, suitable for vertical applications.

• Form: Cement-based, polymer-modified powder
• Color: Gray, White
• Packaging: 25 kg kraft bag
• Shelf Life: 12 months in a dry environment
• Unit Weight: 1300 ±100 g/lt
• Pot Life of Mortar: 3.5 hours
• Working Time: 30 min
• Joint Application: After 24 hours
• Application Thickness: Min. 3mm, Max. 8 mm

The surface to be applied must be free of dust, lime, mold oil, paint residue, and other adhesion-reducing substances. If present, any surface imperfections should be repaired with Allkim Flex Repair Mortar 48 hours in advance.

Pour 6-7 liters of water into a clean container large enough to hold one bag. Slowly add Allkim Flex Extra Tile and Ceramic Adhesive to the water and mix with a low-speed mixer until a homogeneous mixture is obtained. The mixed material is left to rest for about 5 minutes before being ready for use.

The prepared mortar is applied with a notched steel trowel. Depending on ambient temperatures, grouting can be performed after an average of 24 hours.

• Hand mixer
• Notched trowel
• Rubber mallet

1 year from the date of manufacture in dry, moisture-free conditions.

• Application temperature range: +5°C to +35°C
• The floor should be opened to traffic at least 24 hours after application.
• Do not apply without precautions in heavy rain or direct sunlight.
• Do not add foreign substances to Allkim Flex Extra Tile and Ceramic Adhesive.
• Not suitable for floors exposed to heavy traffic; use Allkim Flex Extra Granite and Marble Adhesive for such floors.
• Avoid prolonged contact with eyes and skin; do not inhale dust.
• Personal protective equipment must be used (gloves, dust mask, etc.).

The information provided is valid for application areas with a temperature of 23 ± 2 ⁰C and humidity of 50 ± 5%.

• Standard Type: C1TE TS EN 12004
• Initial Tensile Adhesion Strength: ≥ 0.5 N/mm² TS EN 1348
• Tensile Adhesion Strength after Immersion in Water: ≥ 0.5 N/mm² TS EN 1348
• Tensile adhesion strength after heat aging: ≥ 0.5 N/mm² TS EN 1348
• Tensile adhesion strength after freeze-thaw cycle: ≥ 0.5 N/mm² TS EN 1348
• Tensile adhesion strength after open storage time: ≥ 0.5 N/mm² TS EN 1346
• Slip: ≤ 0.5 mm TS EN 1308

25 kg kraft bags (64 bags per pallet, 1600 kg)